Module d1_pac::tcon_lcd0::lcd_lvds_if

LCD LVDS Configure Register

Structs

• LCD_LVDS_IF_SPEC
  LCD LVDS Configure Register
• R
  Register lcd_lvds_if reader
• W
  Register lcd_lvds_if writer

Enums

• LCD_LVDS_BITWIDTH_A
  Set the bit width of data
• LCD_LVDS_CLK_POL_A
  Set the clock polarity of LVDS
• LCD_LVDS_CLK_SEL_A
  Select the clock source of LVDS
• LCD_LVDS_CORRECT_MODE_A
  Set the LVDS correct mode
• LCD_LVDS_DATA_POL_A
  Set the data polarity of LVDS
• LCD_LVDS_DEBUG_EN_A
  Enable LVDS debug function
• LCD_LVDS_DEBUG_MODE_A
  Set the output signal in debug mode
• LCD_LVDS_DIR_A
  Set the LVDS direction
• LCD_LVDS_EN_A
  Enable LVDS interface
• LCD_LVDS_EVEN_ODD_DIR_A
  Set the order of even field and odd field
• LCD_LVDS_LINK_A
  Select work in single link mode or dual link mode
• LCD_LVDS_MODE_A
  Set the LVDS data mode

Type Aliases

• LCD_LVDS_BITWIDTH_R
  Field lcd_lvds_bitwidth reader - Set the bit width of data
• LCD_LVDS_BITWIDTH_W
  Field lcd_lvds_bitwidth writer - Set the bit width of data
• LCD_LVDS_CLK_POL_R
  Field lcd_lvds_clk_pol reader - Set the clock polarity of LVDS
• LCD_LVDS_CLK_POL_W
  Field lcd_lvds_clk_pol writer - Set the clock polarity of LVDS
• LCD_LVDS_CLK_SEL_R
  Field lcd_lvds_clk_sel reader - Select the clock source of LVDS
• LCD_LVDS_CLK_SEL_W
  Field lcd_lvds_clk_sel writer - Select the clock source of LVDS
• LCD_LVDS_CORRECT_MODE_R
  Field lcd_lvds_correct_mode reader - Set the LVDS correct mode
• LCD_LVDS_CORRECT_MODE_W
  Field lcd_lvds_correct_mode writer - Set the LVDS correct mode
• LCD_LVDS_DATA_POL_R
  Field lcd_lvds_data_pol reader - Set the data polarity of LVDS
• LCD_LVDS_DATA_POL_W
  Field lcd_lvds_data_pol writer - Set the data polarity of LVDS
• LCD_LVDS_DEBUG_EN_R
  Field lcd_lvds_debug_en reader - Enable LVDS debug function
• LCD_LVDS_DEBUG_EN_W
  Field lcd_lvds_debug_en writer - Enable LVDS debug function
• LCD_LVDS_DEBUG_MODE_R
  Field lcd_lvds_debug_mode reader - Set the output signal in debug mode
• LCD_LVDS_DEBUG_MODE_W
  Field lcd_lvds_debug_mode writer - Set the output signal in debug mode
• LCD_LVDS_DIR_R
  Field lcd_lvds_dir reader - Set the LVDS direction
• LCD_LVDS_DIR_W
  Field lcd_lvds_dir writer - Set the LVDS direction
• LCD_LVDS_EN_R
  Field lcd_lvds_en reader - Enable LVDS interface
• LCD_LVDS_EN_W
  Field lcd_lvds_en writer - Enable LVDS interface
• LCD_LVDS_EVEN_ODD_DIR_R
  Field lcd_lvds_even_odd_dir reader - Set the order of even field and odd field
• LCD_LVDS_EVEN_ODD_DIR_W
  Field lcd_lvds_even_odd_dir writer - Set the order of even field and odd field
• LCD_LVDS_LINK_R
  Field lcd_lvds_link reader - Select work in single link mode or dual link mode
• LCD_LVDS_LINK_W
  Field lcd_lvds_link writer - Select work in single link mode or dual link mode
• LCD_LVDS_MODE_R
  Field lcd_lvds_mode reader - Set the LVDS data mode
• LCD_LVDS_MODE_W
  Field lcd_lvds_mode writer - Set the LVDS data mode