Type Alias miette::ErrorHook

pub type ErrorHook = Box<dyn Fn(&(dyn Diagnostic + 'static)) -> Box<dyn ReportHandler> + Sync + Send + 'static>;

Aliased Type

struct ErrorHook(/* private fields */);

Implementations

impl<T> Box<T>

where T: ?Sized,

pub unsafe fn from_raw(raw: *mut T) -> Box<T>

Constructs a box from a raw pointer.

After calling this function, the raw pointer is owned by the resulting Box. Specifically, the Box destructor will call the destructor of T and free the allocated memory. For this to be safe, the memory must have been allocated in accordance with the memory layout used by Box .

Safety

This function is unsafe because improper use may lead to memory problems. For example, a double-free may occur if the function is called twice on the same raw pointer.

The safety conditions are described in the memory layout section.

Examples

Recreate a Box which was previously converted to a raw pointer using Box::into_raw:

let x = Box::new(5);
let ptr = Box::into_raw(x);
let x = unsafe { Box::from_raw(ptr) };

Manually create a Box from scratch by using the global allocator:

use std::alloc::{alloc, Layout};

unsafe {
    let ptr = alloc(Layout::new::<i32>()) as *mut i32;
    // In general .write is required to avoid attempting to destruct
    // the (uninitialized) previous contents of `ptr`, though for this
    // simple example `*ptr = 5` would have worked as well.
    ptr.write(5);
    let x = Box::from_raw(ptr);
}

impl<T> Box<T>

pub fn new(x: T) -> Box<T>

Allocates memory on the heap and then places x into it.

This doesn’t actually allocate if T is zero-sized.

Examples

let five = Box::new(5);

pub fn new_uninit() -> Box<MaybeUninit<T>>

🔬This is a nightly-only experimental API. (new_uninit)

Constructs a new box with uninitialized contents.

Examples

#![feature(new_uninit)]

let mut five = Box::<u32>::new_uninit();

let five = unsafe {
    // Deferred initialization:
    five.as_mut_ptr().write(5);

    five.assume_init()
};

assert_eq!(*five, 5)

pub fn new_zeroed() -> Box<MaybeUninit<T>>

🔬This is a nightly-only experimental API. (new_uninit)

Constructs a new Box with uninitialized contents, with the memory being filled with 0 bytes.

See MaybeUninit::zeroed for examples of correct and incorrect usage of this method.

Examples

#![feature(new_uninit)]

let zero = Box::<u32>::new_zeroed();
let zero = unsafe { zero.assume_init() };

assert_eq!(*zero, 0)

pub fn pin(x: T) -> Pin<Box<T>>

Constructs a new Pin<Box<T>>. If T does not implement Unpin, then x will be pinned in memory and unable to be moved.

Constructing and pinning of the Box can also be done in two steps: Box::pin(x) does the same as Box::into_pin(Box::new(x)). Consider using into_pin if you already have a Box<T>, or if you want to construct a (pinned) Box in a different way than with Box::new.

pub fn try_new(x: T) -> Result<Box<T>, AllocError>

🔬This is a nightly-only experimental API. (allocator_api)

Allocates memory on the heap then places x into it, returning an error if the allocation fails

This doesn’t actually allocate if T is zero-sized.

Examples

#![feature(allocator_api)]

let five = Box::try_new(5)?;

pub fn try_new_uninit() -> Result<Box<MaybeUninit<T>>, AllocError>

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a new box with uninitialized contents on the heap, returning an error if the allocation fails

Examples

#![feature(allocator_api, new_uninit)]

let mut five = Box::<u32>::try_new_uninit()?;

let five = unsafe {
    // Deferred initialization:
    five.as_mut_ptr().write(5);

    five.assume_init()
};

assert_eq!(*five, 5);

pub fn try_new_zeroed() -> Result<Box<MaybeUninit<T>>, AllocError>

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a new Box with uninitialized contents, with the memory being filled with 0 bytes on the heap

See MaybeUninit::zeroed for examples of correct and incorrect usage of this method.

Examples

#![feature(allocator_api, new_uninit)]

let zero = Box::<u32>::try_new_zeroed()?;
let zero = unsafe { zero.assume_init() };

assert_eq!(*zero, 0);

impl<T, A> Box<T, A>

where A: Allocator, T: ?Sized,

pub const unsafe fn from_raw_in(raw: *mut T, alloc: A) -> Box<T, A>

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a box from a raw pointer in the given allocator.

After calling this function, the raw pointer is owned by the resulting Box. Specifically, the Box destructor will call the destructor of T and free the allocated memory. For this to be safe, the memory must have been allocated in accordance with the memory layout used by Box .

Safety

This function is unsafe because improper use may lead to memory problems. For example, a double-free may occur if the function is called twice on the same raw pointer.

Examples

Recreate a Box which was previously converted to a raw pointer using Box::into_raw_with_allocator:

#![feature(allocator_api)]

use std::alloc::System;

let x = Box::new_in(5, System);
let (ptr, alloc) = Box::into_raw_with_allocator(x);
let x = unsafe { Box::from_raw_in(ptr, alloc) };

Manually create a Box from scratch by using the system allocator:

#![feature(allocator_api, slice_ptr_get)]

use std::alloc::{Allocator, Layout, System};

unsafe {
    let ptr = System.allocate(Layout::new::<i32>())?.as_mut_ptr() as *mut i32;
    // In general .write is required to avoid attempting to destruct
    // the (uninitialized) previous contents of `ptr`, though for this
    // simple example `*ptr = 5` would have worked as well.
    ptr.write(5);
    let x = Box::from_raw_in(ptr, System);
}

pub fn into_raw(b: Box<T, A>) -> *mut T

Consumes the Box, returning a wrapped raw pointer.

The pointer will be properly aligned and non-null.

After calling this function, the caller is responsible for the memory previously managed by the Box. In particular, the caller should properly destroy T and release the memory, taking into account the memory layout used by Box. The easiest way to do this is to convert the raw pointer back into a Box with the Box::from_raw function, allowing the Box destructor to perform the cleanup.

Note: this is an associated function, which means that you have to call it as Box::into_raw(b) instead of b.into_raw(). This is so that there is no conflict with a method on the inner type.

Examples

Converting the raw pointer back into a Box with Box::from_raw for automatic cleanup:

let x = Box::new(String::from("Hello"));
let ptr = Box::into_raw(x);
let x = unsafe { Box::from_raw(ptr) };

Manual cleanup by explicitly running the destructor and deallocating the memory:

use std::alloc::{dealloc, Layout};
use std::ptr;

let x = Box::new(String::from("Hello"));
let ptr = Box::into_raw(x);
unsafe {
    ptr::drop_in_place(ptr);
    dealloc(ptr as *mut u8, Layout::new::<String>());
}

Note: This is equivalent to the following:

let x = Box::new(String::from("Hello"));
let ptr = Box::into_raw(x);
unsafe {
    drop(Box::from_raw(ptr));
}

pub fn into_raw_with_allocator(b: Box<T, A>) -> (*mut T, A)

🔬This is a nightly-only experimental API. (allocator_api)

Consumes the Box, returning a wrapped raw pointer and the allocator.

The pointer will be properly aligned and non-null.

After calling this function, the caller is responsible for the memory previously managed by the Box. In particular, the caller should properly destroy T and release the memory, taking into account the memory layout used by Box. The easiest way to do this is to convert the raw pointer back into a Box with the Box::from_raw_in function, allowing the Box destructor to perform the cleanup.

Note: this is an associated function, which means that you have to call it as Box::into_raw_with_allocator(b) instead of b.into_raw_with_allocator(). This is so that there is no conflict with a method on the inner type.

Examples

Converting the raw pointer back into a Box with Box::from_raw_in for automatic cleanup:

#![feature(allocator_api)]

use std::alloc::System;

let x = Box::new_in(String::from("Hello"), System);
let (ptr, alloc) = Box::into_raw_with_allocator(x);
let x = unsafe { Box::from_raw_in(ptr, alloc) };

Manual cleanup by explicitly running the destructor and deallocating the memory:

#![feature(allocator_api)]

use std::alloc::{Allocator, Layout, System};
use std::ptr::{self, NonNull};

let x = Box::new_in(String::from("Hello"), System);
let (ptr, alloc) = Box::into_raw_with_allocator(x);
unsafe {
    ptr::drop_in_place(ptr);
    let non_null = NonNull::new_unchecked(ptr);
    alloc.deallocate(non_null.cast(), Layout::new::<String>());
}

pub const fn allocator(b: &Box<T, A>) -> &A

🔬This is a nightly-only experimental API. (allocator_api)

Returns a reference to the underlying allocator.

Note: this is an associated function, which means that you have to call it as Box::allocator(&b) instead of b.allocator(). This is so that there is no conflict with a method on the inner type.

pub fn leak<'a>(b: Box<T, A>) -> &'a mut T

where A: 'a,

Consumes and leaks the Box, returning a mutable reference, &'a mut T.

Note that the type T must outlive the chosen lifetime 'a. If the type has only static references, or none at all, then this may be chosen to be 'static.

This function is mainly useful for data that lives for the remainder of the program’s life. Dropping the returned reference will cause a memory leak. If this is not acceptable, the reference should first be wrapped with the Box::from_raw function producing a Box. This Box can then be dropped which will properly destroy T and release the allocated memory.

Note: this is an associated function, which means that you have to call it as Box::leak(b) instead of b.leak(). This is so that there is no conflict with a method on the inner type.

Examples

Simple usage:

let x = Box::new(41);
let static_ref: &'static mut usize = Box::leak(x);
*static_ref += 1;
assert_eq!(*static_ref, 42);

Unsized data:

let x = vec![1, 2, 3].into_boxed_slice();
let static_ref = Box::leak(x);
static_ref[0] = 4;
assert_eq!(*static_ref, [4, 2, 3]);

pub fn into_pin(boxed: Box<T, A>) -> Pin<Box<T, A>>

where A: 'static,

Converts a Box<T> into a Pin<Box<T>>. If T does not implement Unpin, then *boxed will be pinned in memory and unable to be moved.

This conversion does not allocate on the heap and happens in place.

This is also available via From.

Constructing and pinning a Box with Box::into_pin(Box::new(x)) can also be written more concisely using Box::pin(x). This into_pin method is useful if you already have a Box<T>, or you are constructing a (pinned) Box in a different way than with Box::new.

Notes

It’s not recommended that crates add an impl like From<Box<T>> for Pin<T>, as it’ll introduce an ambiguity when calling Pin::from. A demonstration of such a poor impl is shown below.

struct Foo; // A type defined in this crate.
impl From<Box<()>> for Pin<Foo> {
    fn from(_: Box<()>) -> Pin<Foo> {
        Pin::new(Foo)
    }
}

let foo = Box::new(());
let bar = Pin::from(foo);

impl<T, A> Box<T, A>

where A: Allocator,

pub fn new_in(x: T, alloc: A) -> Box<T, A>

where A: Allocator,

🔬This is a nightly-only experimental API. (allocator_api)

Allocates memory in the given allocator then places x into it.

This doesn’t actually allocate if T is zero-sized.

Examples

#![feature(allocator_api)]

use std::alloc::System;

let five = Box::new_in(5, System);

pub fn try_new_in(x: T, alloc: A) -> Result<Box<T, A>, AllocError>

where A: Allocator,

🔬This is a nightly-only experimental API. (allocator_api)

Allocates memory in the given allocator then places x into it, returning an error if the allocation fails

This doesn’t actually allocate if T is zero-sized.

Examples

#![feature(allocator_api)]

use std::alloc::System;

let five = Box::try_new_in(5, System)?;

pub fn new_uninit_in(alloc: A) -> Box<MaybeUninit<T>, A>

where A: Allocator,

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a new box with uninitialized contents in the provided allocator.

Examples

#![feature(allocator_api, new_uninit)]

use std::alloc::System;

let mut five = Box::<u32, _>::new_uninit_in(System);

let five = unsafe {
    // Deferred initialization:
    five.as_mut_ptr().write(5);

    five.assume_init()
};

assert_eq!(*five, 5)

pub fn try_new_uninit_in(alloc: A) -> Result<Box<MaybeUninit<T>, A>, AllocError>

where A: Allocator,

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a new box with uninitialized contents in the provided allocator, returning an error if the allocation fails

Examples

#![feature(allocator_api, new_uninit)]

use std::alloc::System;

let mut five = Box::<u32, _>::try_new_uninit_in(System)?;

let five = unsafe {
    // Deferred initialization:
    five.as_mut_ptr().write(5);

    five.assume_init()
};

assert_eq!(*five, 5);

pub fn new_zeroed_in(alloc: A) -> Box<MaybeUninit<T>, A>

where A: Allocator,

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a new Box with uninitialized contents, with the memory being filled with 0 bytes in the provided allocator.

See MaybeUninit::zeroed for examples of correct and incorrect usage of this method.

Examples

#![feature(allocator_api, new_uninit)]

use std::alloc::System;

let zero = Box::<u32, _>::new_zeroed_in(System);
let zero = unsafe { zero.assume_init() };

assert_eq!(*zero, 0)

pub fn try_new_zeroed_in(alloc: A) -> Result<Box<MaybeUninit<T>, A>, AllocError>

where A: Allocator,

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a new Box with uninitialized contents, with the memory being filled with 0 bytes in the provided allocator, returning an error if the allocation fails,

See MaybeUninit::zeroed for examples of correct and incorrect usage of this method.

Examples

#![feature(allocator_api, new_uninit)]

use std::alloc::System;

let zero = Box::<u32, _>::try_new_zeroed_in(System)?;
let zero = unsafe { zero.assume_init() };

assert_eq!(*zero, 0);

pub fn pin_in(x: T, alloc: A) -> Pin<Box<T, A>>

where A: 'static + Allocator,

🔬This is a nightly-only experimental API. (allocator_api)

Constructs a new Pin<Box<T, A>>. If T does not implement Unpin, then x will be pinned in memory and unable to be moved.

Constructing and pinning of the Box can also be done in two steps: Box::pin_in(x, alloc) does the same as Box::into_pin(Box::new_in(x, alloc)). Consider using into_pin if you already have a Box<T, A>, or if you want to construct a (pinned) Box in a different way than with Box::new_in.

pub fn into_boxed_slice(boxed: Box<T, A>) -> Box<[T], A>

🔬This is a nightly-only experimental API. (box_into_boxed_slice)

Converts a Box<T> into a Box<[T]>

This conversion does not allocate on the heap and happens in place.

pub fn into_inner(boxed: Box<T, A>) -> T

🔬This is a nightly-only experimental API. (box_into_inner)

Consumes the Box, returning the wrapped value.

Examples

#![feature(box_into_inner)]

let c = Box::new(5);

assert_eq!(Box::into_inner(c), 5);

Trait Implementations

impl<T> AsFd for Box<T>

where T: AsFd + ?Sized,

fn as_fd(&self) -> BorrowedFd<'_>

Borrows the file descriptor.

impl<T, A> AsMut<T> for Box<T, A>

where A: Allocator, T: ?Sized,

fn as_mut(&mut self) -> &mut T

Converts this type into a mutable reference of the (usually inferred) input type.

impl<T> AsRawFd for Box<T>

where T: AsRawFd,

fn as_raw_fd(&self) -> i32

Extracts the raw file descriptor.

impl<T, A> AsRef<T> for Box<T, A>

where A: Allocator, T: ?Sized,

fn as_ref(&self) -> &T

Converts this type into a shared reference of the (usually inferred) input type.

impl<Args, F, A> AsyncFn<Args> for Box<F, A>

where Args: Tuple, F: AsyncFn<Args> + ?Sized, A: Allocator,

extern "rust-call" fn async_call( &self, args: Args, ) -> <Box<F, A> as AsyncFnMut<Args>>::CallRefFuture<'_>

🔬This is a nightly-only experimental API. (async_fn_traits)

Call the AsyncFn, returning a future which may borrow from the called closure.

impl<Args, F, A> AsyncFnMut<Args> for Box<F, A>

where Args: Tuple, F: AsyncFnMut<Args> + ?Sized, A: Allocator,

type CallRefFuture<'a> = <F as AsyncFnMut<Args>>::CallRefFuture<'a> where Box<F, A>: 'a

🔬This is a nightly-only experimental API. (async_fn_traits)

Future returned by AsyncFnMut::async_call_mut and AsyncFn::async_call.

extern "rust-call" fn async_call_mut( &mut self, args: Args, ) -> <Box<F, A> as AsyncFnMut<Args>>::CallRefFuture<'_>

🔬This is a nightly-only experimental API. (async_fn_traits)

Call the AsyncFnMut, returning a future which may borrow from the called closure.

impl<Args, F, A> AsyncFnOnce<Args> for Box<F, A>

where Args: Tuple, F: AsyncFnOnce<Args> + ?Sized, A: Allocator,

type Output = <F as AsyncFnOnce<Args>>::Output

🔬This is a nightly-only experimental API. (async_fn_traits)

Output type of the called closure’s future.

type CallOnceFuture = <F as AsyncFnOnce<Args>>::CallOnceFuture

🔬This is a nightly-only experimental API. (async_fn_traits)

Future returned by AsyncFnOnce::async_call_once.

extern "rust-call" fn async_call_once( self, args: Args, ) -> <Box<F, A> as AsyncFnOnce<Args>>::CallOnceFuture

🔬This is a nightly-only experimental API. (async_fn_traits)

Call the AsyncFnOnce, returning a future which may move out of the called closure.

impl<S> AsyncIterator for Box<S>

where S: AsyncIterator + Unpin + ?Sized,

type Item = <S as AsyncIterator>::Item

🔬This is a nightly-only experimental API. (async_iterator)

The type of items yielded by the async iterator.

fn poll_next( self: Pin<&mut Box<S>>, cx: &mut Context<'_>, ) -> Poll<Option<<Box<S> as AsyncIterator>::Item>>

🔬This is a nightly-only experimental API. (async_iterator)

Attempts to pull out the next value of this async iterator, registering the current task for wakeup if the value is not yet available, and returning None if the async iterator is exhausted.

fn size_hint(&self) -> (usize, Option<usize>)

🔬This is a nightly-only experimental API. (async_iterator)

Returns the bounds on the remaining length of the async iterator.

impl<T, A> Borrow<T> for Box<T, A>

where A: Allocator, T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value.

impl<T, A> BorrowMut<T> for Box<T, A>

where A: Allocator, T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value.

impl<B> BufRead for Box<B>

where B: BufRead + ?Sized,

fn fill_buf(&mut self) -> Result<&[u8], Error>

Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty.

fn consume(&mut self, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read.

fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize, Error>

Reads all bytes into buf until the delimiter byte or EOF is reached.

fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>

Reads all bytes until a newline (the 0xA byte) is reached, and append them to the provided String buffer.

fn has_data_left(&mut self) -> Result<bool, Error>

🔬This is a nightly-only experimental API. (buf_read_has_data_left)

Checks if the underlying Read has any data left to be read.

fn skip_until(&mut self, byte: u8) -> Result<usize, Error>

🔬This is a nightly-only experimental API. (bufread_skip_until)

Skips all bytes until the delimiter byte or EOF is reached.

fn split(self, byte: u8) -> Split<Self>

where Self: Sized,

Returns an iterator over the contents of this reader split on the byte byte.

fn lines(self) -> Lines<Self>

where Self: Sized,

Returns an iterator over the lines of this reader.

impl<T, A> Clone for Box<T, A>

where T: Clone, A: Allocator + Clone,

fn clone(&self) -> Box<T, A>

Returns a new box with a clone() of this box’s contents.

Examples

let x = Box::new(5);
let y = x.clone();

// The value is the same
assert_eq!(x, y);

// But they are unique objects
assert_ne!(&*x as *const i32, &*y as *const i32);

fn clone_from(&mut self, source: &Box<T, A>)

Copies source’s contents into self without creating a new allocation.

Examples

let x = Box::new(5);
let mut y = Box::new(10);
let yp: *const i32 = &*y;

y.clone_from(&x);

// The value is the same
assert_eq!(x, y);

// And no allocation occurred
assert_eq!(yp, &*y);

impl<G, R, A> Coroutine<R> for Box<G, A>

where G: Coroutine<R> + Unpin + ?Sized, A: Allocator,

type Yield = <G as Coroutine<R>>::Yield

🔬This is a nightly-only experimental API. (coroutine_trait)

The type of value this coroutine yields.

type Return = <G as Coroutine<R>>::Return

🔬This is a nightly-only experimental API. (coroutine_trait)

The type of value this coroutine returns.

fn resume( self: Pin<&mut Box<G, A>>, arg: R, ) -> CoroutineState<<Box<G, A> as Coroutine<R>>::Yield, <Box<G, A> as Coroutine<R>>::Return>

🔬This is a nightly-only experimental API. (coroutine_trait)

Resumes the execution of this coroutine.

impl<T, A> Debug for Box<T, A>

where T: Debug + ?Sized, A: Allocator,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Default for Box<T>

where T: Default,

fn default() -> Box<T>

Creates a Box<T>, with the Default value for T.

impl<T, A> Deref for Box<T, A>

where A: Allocator, T: ?Sized,

type Target = T

The resulting type after dereferencing.

fn deref(&self) -> &T

Dereferences the value.

impl<T, A> DerefMut for Box<T, A>

where A: Allocator, T: ?Sized,

fn deref_mut(&mut self) -> &mut T

Mutably dereferences the value.

impl<T, A> Display for Box<T, A>

where T: Display + ?Sized, A: Allocator,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<I, A> DoubleEndedIterator for Box<I, A>

where I: DoubleEndedIterator + ?Sized, A: Allocator,

fn next_back(&mut self) -> Option<<I as Iterator>::Item>

Removes and returns an element from the end of the iterator.

fn nth_back(&mut self, n: usize) -> Option<<I as Iterator>::Item>

Returns the nth element from the end of the iterator.

fn advance_back_by(&mut self, n: usize) -> Result<(), NonZero<usize>>

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator from the back by n elements.

fn try_rfold<B, F, R>(&mut self, init: B, f: F) -> R

where Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

This is the reverse version of Iterator::try_fold(): it takes elements starting from the back of the iterator.

fn rfold<B, F>(self, init: B, f: F) -> B

where Self: Sized, F: FnMut(B, Self::Item) -> B,

An iterator method that reduces the iterator’s elements to a single, final value, starting from the back.

fn rfind<P>(&mut self, predicate: P) -> Option<Self::Item>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator from the back that satisfies a predicate.

impl<T, A> Drop for Box<T, A>

where A: Allocator, T: ?Sized,

fn drop(&mut self)

Executes the destructor for this type.

impl<T> Error for Box<T>

where T: Error,

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any.

fn provide<'b>(&'b self, request: &mut Request<'b>)

🔬This is a nightly-only experimental API. (error_generic_member_access)

Provides type-based access to context intended for error reports.

impl<I, A> ExactSizeIterator for Box<I, A>

where I: ExactSizeIterator + ?Sized, A: Allocator,

fn len(&self) -> usize

Returns the exact remaining length of the iterator.

fn is_empty(&self) -> bool

🔬This is a nightly-only experimental API. (exact_size_is_empty)

Returns true if the iterator is empty.

impl<Args, F, A> Fn<Args> for Box<F, A>

where Args: Tuple, F: Fn<Args> + ?Sized, A: Allocator,

extern "rust-call" fn call( &self, args: Args, ) -> <Box<F, A> as FnOnce<Args>>::Output

🔬This is a nightly-only experimental API. (fn_traits)

Performs the call operation.

impl<Args, F, A> FnMut<Args> for Box<F, A>

where Args: Tuple, F: FnMut<Args> + ?Sized, A: Allocator,

extern "rust-call" fn call_mut( &mut self, args: Args, ) -> <Box<F, A> as FnOnce<Args>>::Output

🔬This is a nightly-only experimental API. (fn_traits)

Performs the call operation.

impl<Args, F, A> FnOnce<Args> for Box<F, A>

where Args: Tuple, F: FnOnce<Args> + ?Sized, A: Allocator,

type Output = <F as FnOnce<Args>>::Output

The returned type after the call operator is used.

extern "rust-call" fn call_once( self, args: Args, ) -> <Box<F, A> as FnOnce<Args>>::Output

🔬This is a nightly-only experimental API. (fn_traits)

Performs the call operation.

impl<T> From<T> for Box<T>

fn from(t: T) -> Box<T>

Converts a T into a Box<T>

The conversion allocates on the heap and moves t from the stack into it.

Examples

let x = 5;
let boxed = Box::new(5);

assert_eq!(Box::from(x), boxed);

impl<F, A> Future for Box<F, A>

where F: Future + Unpin + ?Sized, A: Allocator,

type Output = <F as Future>::Output

The type of value produced on completion.

fn poll( self: Pin<&mut Box<F, A>>, cx: &mut Context<'_>, ) -> Poll<<Box<F, A> as Future>::Output>

Attempts to resolve the future to a final value, registering the current task for wakeup if the value is not yet available.

impl<T, A> Hash for Box<T, A>

where T: Hash + ?Sized, A: Allocator,

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<T, A> Hasher for Box<T, A>

where T: Hasher + ?Sized, A: Allocator,

fn finish(&self) -> u64

Returns the hash value for the values written so far.

fn write(&mut self, bytes: &[u8])

Writes some data into this Hasher.

fn write_u8(&mut self, i: u8)

Writes a single u8 into this hasher.

fn write_u16(&mut self, i: u16)

Writes a single u16 into this hasher.

fn write_u32(&mut self, i: u32)

Writes a single u32 into this hasher.

fn write_u64(&mut self, i: u64)

Writes a single u64 into this hasher.

fn write_u128(&mut self, i: u128)

Writes a single u128 into this hasher.

fn write_usize(&mut self, i: usize)

Writes a single usize into this hasher.

fn write_i8(&mut self, i: i8)

Writes a single i8 into this hasher.

fn write_i16(&mut self, i: i16)

Writes a single i16 into this hasher.

fn write_i32(&mut self, i: i32)

Writes a single i32 into this hasher.

fn write_i64(&mut self, i: i64)

Writes a single i64 into this hasher.

fn write_i128(&mut self, i: i128)

Writes a single i128 into this hasher.

fn write_isize(&mut self, i: isize)

Writes a single isize into this hasher.

fn write_length_prefix(&mut self, len: usize)

🔬This is a nightly-only experimental API. (hasher_prefixfree_extras)

Writes a length prefix into this hasher, as part of being prefix-free.

fn write_str(&mut self, s: &str)

🔬This is a nightly-only experimental API. (hasher_prefixfree_extras)

Writes a single str into this hasher.

impl<I, A> Iterator for Box<I, A>

where I: Iterator + ?Sized, A: Allocator,

type Item = <I as Iterator>::Item

The type of the elements being iterated over.

fn next(&mut self) -> Option<<I as Iterator>::Item>

Advances the iterator and returns the next value.

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

fn nth(&mut self, n: usize) -> Option<<I as Iterator>::Item>

Returns the nth element of the iterator.

fn last(self) -> Option<<I as Iterator>::Item>

Consumes the iterator, returning the last element.

fn next_chunk<const N: usize>( &mut self, ) -> Result<[Self::Item; N], IntoIter<Self::Item, N>>

where Self: Sized,

🔬This is a nightly-only experimental API. (iter_next_chunk)

Advances the iterator and returns an array containing the next N values.

fn count(self) -> usize

where Self: Sized,

Consumes the iterator, counting the number of iterations and returning it.

fn advance_by(&mut self, n: usize) -> Result<(), NonZero<usize>>

🔬This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator by n elements.

fn step_by(self, step: usize) -> StepBy<Self>

where Self: Sized,

Creates an iterator starting at the same point, but stepping by the given amount at each iteration.

fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter>

where Self: Sized, U: IntoIterator<Item = Self::Item>,

Takes two iterators and creates a new iterator over both in sequence.

fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter>

where Self: Sized, U: IntoIterator,

‘Zips up’ two iterators into a single iterator of pairs.

fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G>

where Self: Sized, G: FnMut() -> Self::Item,

🔬This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator.

fn map<B, F>(self, f: F) -> Map<Self, F>

where Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates an iterator which calls that closure on each element.

fn for_each<F>(self, f: F)

where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each element of an iterator.

fn filter<P>(self, predicate: P) -> Filter<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator which uses a closure to determine if an element should be yielded.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F>

where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both filters and maps.

fn enumerate(self) -> Enumerate<Self>

where Self: Sized,

Creates an iterator which gives the current iteration count as well as the next value.

fn peekable(self) -> Peekable<Self>

where Self: Sized,

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information.

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that skips elements based on a predicate.

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates an iterator that yields elements based on a predicate.

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P>

where Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Creates an iterator that both yields elements based on a predicate and maps.

fn skip(self, n: usize) -> Skip<Self>

where Self: Sized,

Creates an iterator that skips the first n elements.

fn take(self, n: usize) -> Take<Self>

where Self: Sized,

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner.

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>

where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

An iterator adapter which, like fold, holds internal state, but unlike fold, produces a new iterator.

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>

where Self: Sized, U: IntoIterator, F: FnMut(Self::Item) -> U,

Creates an iterator that works like map, but flattens nested structure.

fn map_windows<F, R, const N: usize>(self, f: F) -> MapWindows<Self, F, N>

where Self: Sized, F: FnMut(&[Self::Item; N]) -> R,

🔬This is a nightly-only experimental API. (iter_map_windows)

Calls the given function f for each contiguous window of size N over self and returns an iterator over the outputs of f. Like slice::windows(), the windows during mapping overlap as well.

fn fuse(self) -> Fuse<Self>

where Self: Sized,

Creates an iterator which ends after the first None.

fn inspect<F>(self, f: F) -> Inspect<Self, F>

where Self: Sized, F: FnMut(&Self::Item),

Does something with each element of an iterator, passing the value on.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Borrows an iterator, rather than consuming it.

fn collect<B>(self) -> B

where B: FromIterator<Self::Item>, Self: Sized,

Transforms an iterator into a collection.

fn collect_into<E>(self, collection: &mut E) -> &mut E

where E: Extend<Self::Item>, Self: Sized,

🔬This is a nightly-only experimental API. (iter_collect_into)

Collects all the items from an iterator into a collection.

fn partition<B, F>(self, f: F) -> (B, B)

where Self: Sized, B: Default + Extend<Self::Item>, F: FnMut(&Self::Item) -> bool,

Consumes an iterator, creating two collections from it.

fn is_partitioned<P>(self, predicate: P) -> bool

where Self: Sized, P: FnMut(Self::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_is_partitioned)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false.

fn try_fold<B, F, R>(&mut self, init: B, f: F) -> R

where Self: Sized, F: FnMut(B, Self::Item) -> R, R: Try<Output = B>,

An iterator method that applies a function as long as it returns successfully, producing a single, final value.

fn try_for_each<F, R>(&mut self, f: F) -> R

where Self: Sized, F: FnMut(Self::Item) -> R, R: Try<Output = ()>,

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error.

fn fold<B, F>(self, init: B, f: F) -> B

where Self: Sized, F: FnMut(B, Self::Item) -> B,

Folds every element into an accumulator by applying an operation, returning the final result.

fn reduce<F>(self, f: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(Self::Item, Self::Item) -> Self::Item,

Reduces the elements to a single one, by repeatedly applying a reducing operation.

fn try_reduce<R>( &mut self, f: impl FnMut(Self::Item, Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<<R as Try>::Output>>>::TryType

where Self: Sized, R: Try<Output = Self::Item>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (iterator_try_reduce)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately.

fn all<F>(&mut self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the iterator matches a predicate.

fn any<F>(&mut self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the iterator matches a predicate.

fn find<P>(&mut self, predicate: P) -> Option<Self::Item>

where Self: Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element of an iterator that satisfies a predicate.

fn find_map<B, F>(&mut self, f: F) -> Option<B>

where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of iterator and returns the first non-none result.

fn try_find<R>( &mut self, f: impl FnMut(&Self::Item) -> R, ) -> <<R as Try>::Residual as Residual<Option<Self::Item>>>::TryType

where Self: Sized, R: Try<Output = bool>, <R as Try>::Residual: Residual<Option<Self::Item>>,

🔬This is a nightly-only experimental API. (try_find)

Applies function to the elements of iterator and returns the first true result or the first error.

fn position<P>(&mut self, predicate: P) -> Option<usize>

where Self: Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in an iterator, returning its index.

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item>

where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value from the specified function.

fn max_by<F>(self, compare: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function.

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item>

where B: Ord, Self: Sized, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value from the specified function.

fn min_by<F>(self, compare: F) -> Option<Self::Item>

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function.

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)

where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Iterator<Item = (A, B)>,

Converts an iterator of pairs into a pair of containers.

fn copied<'a, T>(self) -> Copied<Self>

where T: 'a + Copy, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which copies all of its elements.

fn cloned<'a, T>(self) -> Cloned<Self>

where T: 'a + Clone, Self: Sized + Iterator<Item = &'a T>,

Creates an iterator which clones all of its elements.

fn array_chunks<const N: usize>(self) -> ArrayChunks<Self, N>

where Self: Sized,

🔬This is a nightly-only experimental API. (iter_array_chunks)

Returns an iterator over N elements of the iterator at a time.

fn sum<S>(self) -> S

where Self: Sized, S: Sum<Self::Item>,

Sums the elements of an iterator.

fn product<P>(self) -> P

where Self: Sized, P: Product<Self::Item>,

Iterates over the entire iterator, multiplying all the elements

fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn partial_cmp<I>(self, other: I) -> Option<Ordering>

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Lexicographically compares the PartialOrd elements of this Iterator with those of another. The comparison works like short-circuit evaluation, returning a result without comparing the remaining elements. As soon as an order can be determined, the evaluation stops and a result is returned.

fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering>

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,

🔬This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function.

fn eq<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are equal to those of another.

fn eq_by<I, F>(self, other: I, eq: F) -> bool

where Self: Sized, I: IntoIterator, F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,

🔬This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function.

fn ne<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialEq<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are not equal to those of another.

fn lt<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> bool

where I: IntoIterator, Self::Item: PartialOrd<<I as IntoIterator>::Item>, Self: Sized,

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

fn is_sorted_by<F>(self, compare: F) -> bool

where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> bool,

Checks if the elements of this iterator are sorted using the given comparator function.

fn is_sorted_by_key<F, K>(self, f: F) -> bool

where Self: Sized, F: FnMut(Self::Item) -> K, K: PartialOrd,

Checks if the elements of this iterator are sorted using the given key extraction function.

impl<T, A> Ord for Box<T, A>

where T: Ord + ?Sized, A: Allocator,

fn cmp(&self, other: &Box<T, A>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl<T, A> PartialEq for Box<T, A>

where T: PartialEq + ?Sized, A: Allocator,

fn eq(&self, other: &Box<T, A>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Box<T, A>) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T, A> PartialOrd for Box<T, A>

where T: PartialOrd + ?Sized, A: Allocator,

fn partial_cmp(&self, other: &Box<T, A>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Box<T, A>) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Box<T, A>) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Box<T, A>) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Box<T, A>) -> bool

Tests greater than (for self and other) and is used by the > operator.

impl<T, A> Pointer for Box<T, A>

where A: Allocator, T: ?Sized,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<R> Read for Box<R>

where R: Read + ?Sized,

fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_buf(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Pull some bytes from this source into the specified buffer.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers.

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Reads all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Reads all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Reads the exact number of bytes required to fill buf.

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Reads the exact number of bytes required to fill cursor.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

where Self: Sized,

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R>

where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

where Self: Sized,

Creates an adapter which will read at most limit bytes from it.

impl<S> Seek for Box<S>

where S: Seek + ?Sized,

fn seek(&mut self, pos: SeekFrom) -> Result<u64, Error>

Seek to an offset, in bytes, in a stream.

fn stream_position(&mut self) -> Result<u64, Error>

Returns the current seek position from the start of the stream.

fn rewind(&mut self) -> Result<(), Error>

Rewind to the beginning of a stream.

fn stream_len(&mut self) -> Result<u64, Error>

🔬This is a nightly-only experimental API. (seek_stream_len)

Returns the length of this stream (in bytes).

fn seek_relative(&mut self, offset: i64) -> Result<(), Error>

Seeks relative to the current position.

impl<W> Write for Box<W>

where W: Write + ?Sized,

fn write(&mut self, buf: &[u8]) -> Result<usize, Error>

Writes a buffer into this writer, returning how many bytes were written.

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers.

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Writer has an efficient write_vectored implementation.

fn flush(&mut self) -> Result<(), Error>

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<(), Error>

🔬This is a nightly-only experimental API. (write_all_vectored)

Attempts to write multiple buffers into this writer.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Creates a “by reference” adapter for this instance of Write.

impl<T, U, A> CoerceUnsized<Box<U, A>> for Box<T, A>

where T: Unsize<U> + ?Sized, A: Allocator, U: ?Sized,

impl<T, A> DerefPure for Box<T, A>

where A: Allocator, T: ?Sized,

impl<T, U> DispatchFromDyn<Box<U>> for Box<T>

where T: Unsize<U> + ?Sized, U: ?Sized,

impl<T, A> Eq for Box<T, A>

where T: Eq + ?Sized, A: Allocator,

impl<I, A> FusedIterator for Box<I, A>

where I: FusedIterator + ?Sized, A: Allocator,

impl<T, A> Unpin for Box<T, A>

where A: Allocator, T: ?Sized,