Module d1_pac::csic::csic_dma::csic_dma_en

CSIC DMA Enable Register

Structs

• CSIC_DMA_EN_SPEC
  CSIC DMA Enable Register
• R
  Register csic_dma_en reader
• W
  Register csic_dma_en writer

Enums

• BK_TOP_EN_A
  Value on reset: 0
• BUF_ADDR_MODE_A
  Value on reset: 0
• BUF_LENGTH_CFG_MODE_A
  Buffer length set by software or calculated by hardware
• CLK_CNT_EN_A
  clk count per frame enable
• CLK_CNT_SPL_A
  Sampling time for clk counter per frame
• DMA_EN_A
  When BK_TOP_EN is enabled, setting 1 to this bit indicates the module works in DMA mode.
• FLIP_SIZE_CFG_MODE_A
  FLIP SIZE set by software or calculated by hardware
• FRAME_CNT_EN_A
  When BK_TOP_EN is enabled, setting 1 to this bit indicates the Frame counter starts to add.
• VFLIP_BUF_ADDR_CFG_MODE_A
  Vflip buffer address set by software or calculated by hardware
• VI_TO_CNT_EN_A
  Enable Video Input Timeout counter, add 1 when there is no effective video input in a 12M clock, clear to 0 when detecting effective video input.

Type Aliases

• BK_TOP_EN_R
  Field bk_top_en reader -
• BK_TOP_EN_W
  Field bk_top_en writer -
• BUF_ADDR_MODE_R
  Field buf_addr_mode reader -
• BUF_ADDR_MODE_W
  Field buf_addr_mode writer -
• BUF_LENGTH_CFG_MODE_R
  Field buf_length_cfg_mode reader - Buffer length set by software or calculated by hardware
• BUF_LENGTH_CFG_MODE_W
  Field buf_length_cfg_mode writer - Buffer length set by software or calculated by hardware
• CLK_CNT_EN_R
  Field clk_cnt_en reader - clk count per frame enable
• CLK_CNT_EN_W
  Field clk_cnt_en writer - clk count per frame enable
• CLK_CNT_SPL_R
  Field clk_cnt_spl reader - Sampling time for clk counter per frame
• CLK_CNT_SPL_W
  Field clk_cnt_spl writer - Sampling time for clk counter per frame
• DMA_EN_R
  Field dma_en reader - When BK_TOP_EN is enabled, setting 1 to this bit indicates the module works in DMA mode.
• DMA_EN_W
  Field dma_en writer - When BK_TOP_EN is enabled, setting 1 to this bit indicates the module works in DMA mode.
• FLIP_SIZE_CFG_MODE_R
  Field flip_size_cfg_mode reader - FLIP SIZE set by software or calculated by hardware
• FLIP_SIZE_CFG_MODE_W
  Field flip_size_cfg_mode writer - FLIP SIZE set by software or calculated by hardware
• FRAME_CNT_EN_R
  Field frame_cnt_en reader - When BK_TOP_EN is enabled, setting 1 to this bit indicates the Frame counter starts to add.
• FRAME_CNT_EN_W
  Field frame_cnt_en writer - When BK_TOP_EN is enabled, setting 1 to this bit indicates the Frame counter starts to add.
• VER_EN_R
  Field ver_en reader -
• VER_EN_W
  Field ver_en writer -
• VFLIP_BUF_ADDR_CFG_MODE_R
  Field vflip_buf_addr_cfg_mode reader - Vflip buffer address set by software or calculated by hardware
• VFLIP_BUF_ADDR_CFG_MODE_W
  Field vflip_buf_addr_cfg_mode writer - Vflip buffer address set by software or calculated by hardware
• VI_TO_CNT_EN_R
  Field vi_to_cnt_en reader - Enable Video Input Timeout counter, add 1 when there is no effective video input in a 12M clock, clear to 0 when detecting effective video input.
• VI_TO_CNT_EN_W
  Field vi_to_cnt_en writer - Enable Video Input Timeout counter, add 1 when there is no effective video input in a 12M clock, clear to 0 when detecting effective video input.