Module d1_pac::tve::tve_configuration1

TV Encoder Configuration Register1

Structs

• R
  Register tve_configuration1 reader
• TVE_CONFIGURATION1_SPEC
  TV Encoder Configuration Register1
• W
  Register tve_configuration1 writer

Enums

• BYPASS_YCLAMP_A
  Y input clamping selection
• RGB_SETUP_A
  “Set-up” enable for RGB outputs. This bit specifies if the “set-up” implied value (black_level - blank_level) specified for the CVBS signal is used also for the RGB signals.

Type Aliases

• BYPASS_YCLAMP_R
  Field bypass_yclamp reader - Y input clamping selection
• BYPASS_YCLAMP_W
  Field bypass_yclamp writer - Y input clamping selection
• RGB_SETUP_R
  Field rgb_setup reader - “Set-up” enable for RGB outputs. This bit specifies if the “set-up” implied value (black_level - blank_level) specified for the CVBS signal is used also for the RGB signals.
• RGB_SETUP_W
  Field rgb_setup writer - “Set-up” enable for RGB outputs. This bit specifies if the “set-up” implied value (black_level - blank_level) specified for the CVBS signal is used also for the RGB signals.
• RGB_SYNC_R
  Field rgb_sync reader - R, G and B signals sync embedding selection.
• RGB_SYNC_W
  Field rgb_sync writer - R, G and B signals sync embedding selection.